"220V AC Cooling Fan" operating mode
1, parallel fan: dual fan pressure parallel unchanged, but will increase the amount of wind. Therefore increase the amount of wind to increase the cooling effect, in the design of power if the heat is too small, you can consider increasing the fan to resolve.
2, the series fan: Results of the series fan is pressure to increase, but the wind changed. This approach is not to solve the heat problem, generally used in the past when much wind resistance adopted to ensure that the amount of wind. "220V AC Cooling Fan" major issues: Using the process in order to reduce the low-noise must note the following: "220V AC Cooling Fan" System Impedance: Air flow resistance will cause air flow noise generation. Airflow turbulence: due to poor design of the flow channel of air turbulence caused by high-frequency noise will appear, if it does not improve the flow channel is difficult to have a qualitative improvement. Fan speed and size: the cooling fan speed sooner the better, the greater the larger the size of the fan air flow, cooling effect is better. Fans of turn, The higher the speed the greater the noise, the larger the size the larger the noise. Temperature rise: after reducing the temperature difference between the temperature rise, the cooling effect is reduced. Vibration: vibration will cause the fan noise increased, reducing life expectancy as well as the speed is reduced.